Do you want to boost performance of your corolla? Are you aware about corolla tune up and its importance? Well, when it comes to car performance and power drive, it becomes essential to tune up your vehicle. Off course, regular maintenance and proper care make your vehicle run efficiently and smoothly for years to come. For every vehicle owner, it is essential to understand a basic thumb rule to get the oil changed after every 3,000 miles. In addition, you should tune-up your used corolla after every 30,000 miles.
Tuning up a Corolla is the most important yet comparatively easy on the pocket maintenance procedure. If you have some knowledge about vehicle engine and are interested in trying your hands to tune up corolla on your own, then you can save lots of money. Off course, it is always better to seek an expert’s aid in this regard. However, with little efforts, time and knowledge you can do it on your own.
The corolla tune-up involves changing numerous basic parts, which you can get at local auto parts shop at an ease. Almost all procedures can be done easily without expert mechanical knowledge.
Let us have a look at the steps involved in tuning up the corolla. For this, you will need different things like an adjustable wrench, Phillips-head screw driver, fuel filter, flat-head screw driver, spark plugs, 5/8″ plug wrench, points, spark plug wires, condenser, engine drive belts, distributor cap, shallow baking pan, air filter, motor oil etc.
First, disconnect the old fuel filter by using adjustable wrench. Take it out. Now replace it with new air filter. Remove the screws from the distributor cap. With this, you will be able to access the spark plugs in easier manner. The old distributor cap is not of use but the screws can be utilized. Now, by means of 5/8-inch wrench, loosen and take away the spark plugs. With this particular wrench, you will be able to accomplish the task in easier, faster and effective way. While it is possible to take out all the old ones, and then affix the new ones. It is beneficial to take out one and install the new plug and so on. In such way, you can find out the insertion points easily.
Take out the old spark plug wires. Now replace the new ones. Detach the screws that hold the plate in which the old points are affixed. Take out the old points and replace the new ones. You can discard the old points. After this, screw the holding plate again. Take out the old condenser. For this you will need to unscrew couple of screws that hold it in its place. Discard old condenser and install the new one. After this, tighten the screws. Replace the distributor cap.
Remove the retaining bolts from the engine drive belt to detach the belt. For this, you can utilize a large screw driver. Use these tools to pry the belts from the pulley. Now replace the new belts. It is time to change the oil. For this, slide a baking pan under the oil pan of car. This will catch the old oil if it drains. Take out the bolt plug. When the oil drains completely, change the bolt plug and refill the new oil in the engine. After this, replace the air filter.
With above tips, you can have much better Corolla and more fun to drive the smoothly and efficiently performing vehicle. This will help you enhance the vehicle performance without hitting hard on your pocket. Get ready to have fuel efficient and smooth running corolla in easier, faster and effective way now!